Pride of the Farm OP93 Insulation Sleeve Tywrap, 10 1/2 Inch
Pride of the Farm OP93 Insulation Sleeve Tywrap, 10 1/2 Inch
Part Number OP93
Couldn't load pickup availability
Small part, and the one people forget until they are standing in the pen with the sleeve in one hand. The OP93 is the 10 1/2 inch tywrap that clamps the foam insulation sleeve to the supply line inside a Polar Max waterer.
It appears on the parts sheet for the whole Polar Max flap range, the WPM10, WPM10A, WPM14, WPM14A, WPM16, WPM20, WPM80 and WPM120. Anywhere that foam sleeve has to stay put, this is what holds it.
Worth ordering a spare whenever you plan a valve or riser repair. A tywrap has to be cut to get the sleeve off, and the one you cut will not go back on, so a job that needed one part can stall over a part that costs very little.
Specifications
- Length 10 1/2 inches
- Secures the foam insulation sleeve to the supply line
- Fits every Polar Max flap model, WPM10 through WPM120
- Single use, cut it off and fit a fresh one
Slide the foam sleeve into place on the supply line, wrap the OP93 around it and pull it snug by hand. Do not overtighten, the sleeve only needs to be held, not compressed.
Share
