Hoskins H9-34S SS Heated Pig Waterer, 9 in. Frame – 6 Gallon
Hoskins H9-34S SS Heated Pig Waterer, 9 in. Frame – 6 Gallon
Part Number H934SSS
Couldn't load pickup availability
The lighter 34 in. single, 70 lb. against 75, with the same 6 gallons and the same AA element.
What you are getting
- Stainless steel tank, 6 gallons (23 litres)
- Overall 17 in. long by 34 in. wide by 9 in. tall
- Insulated galvanized steel frame, 70 lb. empty
- Two Model A elements, 500 watts total, held off the tank
- 3/8 in. RM 153
- 1 1/2 in. rubber stopper on the drain
- One drinking compartment
- Rated for up to 150 hogs
The SS build has a stainless frame
On the Hoskins price list these are the "Hog SS Frame" models. Same stainless tank, same dimensions, same valve and stopper as the standard build, but the frame around it is stainless steel instead of insulated galvanized. Fewer pounds, more money, and a frame that shrugs off a wash-down.
How Hoskins builds them
The H9-34S SS puts 500 watts behind 6 gallons, and the element is held off the tank so the heat arrives as warm air rather than as a hot spot on the wall of the tank.
The RM 153 float-and-valve assembly, 3/8 in., sits in an insulated compartment of their own behind a lift-off cover, so a repair in January does not mean emptying the tank. The drain stopper is 1 1/2 in..
This one measures 34 in. across the body and stands 9 in. deep, carrying one compartment. This is the stainless-framed version, 70 lb. empty, and it stands up to washing better than galvanized.
Putting one in
The water line and the power both come up inside the base of a H9-34S SS, so one trench carries both and the stub-ups have to land inside a 17 by 34 in. footprint. Set a reinforced pad roughly 25 by 42 in. and stand it a few inches above the ground around it, which keeps muck from packing against the frame.
Electrically the Model AA element pulls 4.2 amps on 120 volts, so its own 15 amp circuit is enough. Ask whoever wires it to confirm the earth at the same visit. Stray voltage is the usual reason stock go off a waterer that is working perfectly well, and it is almost never the first thing anyone checks.
Read your water pressure at the unit rather than at the well, and read it more than once in a day. At 70 lb. empty two people can set this one, which is part of why it ships by UPS. Hoskins puts the rating at up to 150 hogs.
Browse the rest of the line under Hoskins pig waterers, or see Hoskins waterer parts.
Share

More about the H9-34S SS
Parts the H9-34S SS takes
Valve: 3/8 in. RM 153 (no separate float rod on this model). Drain stopper: 1 1/2 in.. Heating element: Model AA, 500 watts at 120 volts.
Every one of those is a stock item here. The full list for this model is in the collection further down the page.
Shipping and pick-up
At 70 lb. the H9-34S SS goes out by UPS ground, the same way a box of parts does, so there is no freight quote to wait on.
Pick-up at Hoskins, NE is available if you would sooner collect it.
Dimensions and weight
Overall 17 in. long by 34 in. wide by 9 in. tall. Tank capacity 6 gallons. Weight empty 70 lb.
Allow a pad a few inches wider than the frame on every side, standing above the surrounding ground so muck does not pack against it.
Keeping it running
Flush the tank weekly through the cold months and check that the 1 1/2 in. stopper is seating on clean rubber. The 3/8 in. RM 153 assembly is the one wearing part worth a spare.
If stock suddenly go off a waterer that is working, check the ground at the breaker box before anything else. Stray voltage puts animals off water and nothing looks wrong.
Need Parts for your Hoskins H9-34S SS?
The parts that fit a Hoskins H9-34S SS, gathered in one place so you are not reading a spec sheet in a cold valve compartment.
This model takes the 3/8 in. RM 153 valve and float assembly, which needs no separate rod, a 1 1/2 in. rubber stopper, and the AA500 element. Valve, rod and stopper all sit behind the same service door, so if one is coming out it is worth checking the others while the cover is off.
All Hoskins lists are on our parts lists page, and the whole range is under Hoskins waterer parts.
-
Hoskins GP Valve Assembly, 3/8 in.
Regular price $55.00 USDRegular priceUnit price / perSale price $55.00 USD -
Hoskins Rubber Drain Stopper, 1 1/2 in.
Regular price $3.00 USDRegular priceUnit price / perSale price $3.00 USD
Subscribe to our emails
Be the first to know about new collections and exclusive offers.
