• Hoskins heating element 250W 120V with spade terminal, waterer replacement
1 1

Hoskins Heating Element – 250W, 120V

Hoskins Heating Element – 250W, 120V

Part Number

$43.00 USD
$43.00 USD
Sale Sold out
Shipping calculated at checkout.

250W element, 120 volts

The element out of the Hoskins A250 heater, supplied on its own. Two hundred and fifty watts at 120 volts, a shade over two amps.

Bare element, not the whole heater

This part is the heating element on its own leads. Hoskins also builds a complete heater, a galvanized box with the element, blower, thermostat and cord already assembled, which is a different line at a much higher price. If the housing on yours is sound and only the element has gone, this is what you want.

Detail

  • Rating: 250W, 120V, approximately 2.1 A
  • Termination: bare leads for a hard wired connection
  • Position: frame mounted, away from the tank wall

Units that take it

  • HC7-16
  • HC7-26
  • HC14-16
  • HC14-26
  • SC22-16
  • H9-14D
  • H9-14D SS
  • H9-22S
  • H9-22S SS
  • H9-22D
  • H9-22D SS

Which thermostat

Elements in the A and AA family pair with the small thermostat. Ratings of B, 2B, C, 2C or 3C call for the large one.

Circuit notes

Hoskins asks for #8 copper back to the panel, a ground rod driven eight feet at the unit, and a GFCI breaker wherever code calls for one. Their installation sheet carries a conductor sizing table for runs out to 400 feet on 115 to 120 volt service. Hoskins recommends a licensed electrician.

Questions about fit

Give us the model number stamped on the unit through our contact page and we will verify the part before it leaves here.

View full details